Configure Arming Schedule Template

The arming schedule defines the arming mode (instant arming / away arming / stay arming) in different periods for the partitions (areas) of the added security control devices.

1. On the top navigation bar, go to > Security Monitoring > Alarm Detection > Arming Schedule Template.
2. Click to enter the Add Arming Schedule Template page.
3. Enter a name for the template.
4. Optional: In Copy from field, select an existing template from the drop-down list to copy the settings.
5. Select an arming mode and drag the mouse on the time bar to draw a time period.
   Note:

   Up to 8 time periods can be set for each day.

   Instant Arm

   When people leave the detection area, the zones will be armed immediately without delay.

   Away Arm

   If all people in the detection area are going to leave, turn on this mode to arm the zones in the area after the defined dwell time.

   Stay Arm

   It is used when people stay inside the detection area. Turn on this mode to turn on all the perimeter burglary detectors (such as perimeter detectors, magnetic contacts, curtain detectors in the balcony). Meanwhile, the detectors inside the detection area are bypassed (such as PIR detectors). People can move inside the area and alarms will not be triggered.

6. Optional: Click Erase and click on the drawn time period to clear it.
7. Click Add.

   The arming schedule template will be displayed on the arming schedule template list.