Set Locations for Video Intercom Devices

You can add single device or batch add devices that have been added to the platform, and set location information for the added device(s).

1. On the top navigation bar, select > Passing Management > Video Intercom.
2. Select Device Management on the left.
3. Add the device(s).

   • Add single device.

     1. Click Add to add the device which has been added to the platform.

     2. Select a device type and a device.

     3. Set the location of the device, and click Add.

   • Add devices in a batch.

     1. Click > Batch Add to add devices which have been added to the platform.

     2. Select the device type.

     3. Select the adding mode to add device.

        Manually Select	Select devices manually in the drop-down list. Set required information. Note: If the community is divided into different sections, enter the corresponding number. If not,enter 1. If the building is composed of only one unit, enter 1.
        Batch Import	Click Download Template to download the template file to your PC. Open the downloaded template file and enter the required information. Click to select the file finished in the previous step.

     4. Click Add.

4. Click a device name.
5. In Location area, set parameters as needed.
   Note:

   • If the community is divided into different sections, enter the corresponding number. If not,enter 1.

   • If the building is composed of only one unit, enter 1.

   • The parameters displayed vary with device types.

6. Set Main and Sub Relation to Main Module or Sub Module.
   Note:

   This feature is only Available for door stations and indoor stations.

7. Click Save to save your edited information.