Apply Location to Video Intercom Devices

After setting location information for video intercom devices, you need to apply settings to devices.

On the top navigation bar, select > Passing Management > Video Intercom.

Select Device Management on the left.

Click Apply Settings.

Select the device(s) to apply.

All Devices

By default, the changed settings will be applied to all devices. If you check Apply (Initial), first clear all former information applied to the devices, and then apply all settings configured on the platform this time to the devices.

Specified Device(s)

Click to select devices. The settings will be applied to the selected device(s).

Select an applying mode.

Apply Changes

Apply changes to the edited devices and devices linked to the edited devices.

Apply All

Apply all settings to the edited device and devices linked to the edited devices.

Apply (Initial)

First clear all former linkages applied to the devices, and then apply all linkages configured on the platform this time to the devices. This mode is mainly used for first-time deployment.

Click Apply to apply settings to the device(s).

The procedure of applying information will be displayed in the pop-up window, and the reasons for failures will be displayed in the Reason column. Move the cursor over , and click Retry to apply the settings to devices again. Also, move the cursor over , and click View Details to view the details. You can also click Retry to re-apply settings to devices.