Configure Sensor Alarms

Set the handling action of an external sensor alarm.

1. Go to System > Event > Normal Event > Alarm Input.
2. Select an alarm input item from the list and click .
3. Select the alarm input type.
4. Edit the alarm name.
5. Set Settings as Input to enable the function.
   Note:

   If you set Settings as Nonuse, the alarm input will be disabled. If you set Settings as One-Key Disarming, the selected linkage method(s) of the alarm input will be disabled.

6. Set the arming schedule. Refer to Configure Arming Schedule.
7. Set linkage actions. Refer to Configure Linkage Actions.
8. Optional: Set combined alarm. Refer to Configure Combined Alarm.