Add a User

  1. Go to System > User.
  2. Click Add to enter the operation permission interface.
  3. Input the admin password and click OK.
  4. In the Add User interface, enter the information for a new user.
    CAUTION:

    Strong Password Recommended–We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. We also recommend that you reset your password regularly. Especially in the high security systems, resetting the password monthly or weekly can better protect your product.

    User Level

    Set the user level to Operator or Guest. Different user levels have different operating permission.

    • Operator: An Operator user level has Two-way Audio permission in Remote Configuration and all operating permissions in Camera Configuration by default.

    • Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and only has the local/remote playback in the Camera Configuration by default.

    User’s MAC Address

    The MAC address of the remote PC that logs onto the device. If it is configured and enabled, it allows only the remote user with this MAC address to access the device.

  5. Click OK.
    In the User Management interface, the added new user is displayed on the list.