Login via Web Client (Administrator)

You can access the system via web browser and configure the system.

1. In the address bar of the web browser, input the address of the PC running SYS service and press Enter key.

   If the IP address of PC running SYS is 172.6.21.96, and you should enter http://172.6.21.96 or https://172.6.21.96 in the address bar.

   Note

   You should configure the SYS's IP address in WAN Access of System Configuration before accessing the SYS via WAN. For details, refer to Set WAN Access.

2. Select the Management tab.
3. Enter the user name and password.
4. Click Log In to log in to the system.
   Note

   • If failed password attempt of current user is detected, you are required to input the verification code. The failed password attempts from current client, other client, and other address will all require the verification code.

   • The failed password attempt and verification code attempt from current client, other client (e.g., Control Client), and other address will all be accumulated. Your IP address will be locked for a specified period of time after specific number of failed password or verification code attempts detected.

   • The account will be frozen for 30 minutes after 5 failed password attempts. The failed password attempts from current client, other clients (e.g., Control Client), and other addresses will all be accumulated.

   • When the account is frozen after accumulated failed password attempts, you can still try login on another PC.

   • The password strength can be checked by the system and should meet the system requirements. If password strength is lower than the required minimum strength, you will be asked to change your password.

   • If your password is expired, you will be asked to change your password when login.