Set Basic Settings for Broadcast

You can set locations to save the audio file and live broadcast recording file. Also, you can set parameters related with live broadcast, including broadcast mode and encoding format.

1. On the top navigation bar, select > Integrated Service > Audio Broadcast to enter the audio broadcast page.
2. On the left navigation pane, click Basic Configuration.
3. In Audio File area, select Local Storage or pStor as the location to save the audio file, and select the corresponding resource pool.
   Note:

   When selecting pStor as the storage location, make sure you have added pStor to the platform. For details, refer to Add pStor.

4. In Live Broadcast Recording area, check Live Broadcast Recording.
5. Select Local Storage or pStor as the location to save the recording file, and select the corresponding resource pool.
   Note:

   When selecting pStor as the storage location, make sure you have added pStor to the platform. For details, refer to Add pStor.

6. In Live Broadcast Parameters area, select the broadcast mode and the encoding format from the drop-down list.

   Default

   The SYS server automatically judges via which method to send the broadcast data to the speaker unit according to the network domain of the Client (Web Client, Control Client, or Mobile Client).

   Via Streaming Server Proxy

   The Client sends the broadcast data to the speaker unit via the streaming server.

   Direct Access

   The Client directly sends the broadcast data to the speaker unit.

   Via Center Proxy

   The Client sends the broadcast data to the speaker unit via the SYS server.

7. Click Save to save the above settings.